New Billet Steering Wheel Hubs for Grant Steeing wheels now available.
New item-Steel Oil Pump Gear for Command motors, replace the plastic pump gear that will eventually break.
Shifters are back in stock!
The 5's & 10's # Weights won't be available until July., Call to get your name on the list for wts when they come in
T-shirts and Sweatshirts are available on line or call in if you want something you don't see!
Due to the rising cost of shipping we changed our FREE shipping on purchases of $150 or more online instead of over $100. Since shipping is not what it was before we are offering you a choice to have your package ship UPS or Fed Ex instead of free by USPS, but at a cost of $15.00 whatever your total is.
All call in orders will be charged a processing fee of $9.95.
Posted by Julian Stahl on
How big can you bore a stock block. 10-12 Block biggest you can bore is 50 over on old style which is 3.420.
The newer style blocks can go 3.530 for 14HP Largest valve for 10HP Intake
1.850 Exhaust 1.50. Measure cylinder wall by using calipers between fins
and inside diameter of cylinder.
16 HP stock can be bored 30 over 3.780 to 3.937. Head strap is needed!
18HP Blocks K361 can be bored to 3-15/16 must have head supports.
Welcome to the world of adult Dating loveawake.ru
i’v got a 25hp kohler command horz. shaft. i ordered your 6.350 push rods along with your single spring heavy valve springs. when i tighten down the rockers it pushes down the valve then i have no compression. i even shimed under the rocker bolt still no compression. what am i doing wrong??
hay Julian I have a 16 hp opposed briggs what is the most I can bore it out and do yall bore them out thank you?